GARDENA - Water Control EasyPlus
Watering and cooling - 2-step operation
Using the GARDENA Water Control EasyPlus, the irrigation system in your garden can easily be switched on and off. The battery-operated unit is connected to the tap and operated via two rotary knobs. Different combinations of duration and repetition can be selected for the irrigation. The start delay function in hourly cycles controls the operation of a sprinkler or a drip irrigation system at the desired time. It is best to water your garden in the early morning or late evening. The weatherproof operating unit can be removed. Additional settings for the GARDENA Outdoor Spray Mist Set: optimum air cooling through short impulses in fast frequencies.
Watering duration 0 h 1 min - 2 h 0 min
Watering frequency every 4/8/12/24/48/72 hours
The Water Control can easily be set using two large rotary knobs for the duration and frequency of the irrigation respectively. The weatherproof operating unit can be removed for even more convenient adjustment.
For irrigation purposes, one of 60 different combinations of duration and frequency can be selected. With the aid of the start delay function in hourly cycles, the operation of a sprinkler or drip irrigation system can be set to the desired time.
Ideal for the Outdoor Spray Mist Set
Due to the additional combinations of short pulses and frequent repetitions, the Water Control EasyPlus is ideal for use with the GARDENA Outdoor Spray Mist Set for air-cooling purposes.
‘Water Now’ function
If the irrigation has to be started immediately, this can be manually activated without removing the unit from the tap or changing the settings.
‘Safe Stop’ technology
The Water Control always works reliably due to the ‘Safe Stop’ technology. If the energy levels of the battery are too low to completely control an irrigation process, then this process is not commenced. A red LED also warns in good time that the battery has to be replaced.
|Energy supply 1 x 9 V alkaline battery (not included)
Operating pressure Min 0.5 bar
Operating pressure Max 12 bar
|Thread For taps with 26.5 mm (G 3/4) and 33.3 mm (G1) thread